Skip to Content

SNP-POE Series

SNP-POE seriesSNP-POE series

Description:

SNP-POE series is an adapter for Ethernet application.  It delivers power to end device through four idle lines of Ethernet cable.  To prevent the tiny signal line damage, the rated current allowed is 350mA, the trip point of over current protection is around 450mA.  At no load condition, this meets green power regulation.

 

Models Available:

  • SNP-P0E7

  • SNP-P0E9

  • SNP-P0ET

General Specification:

 

Input voltage

90 VAC to 264 VAC

Input frequency

47Hz to 63 Hz

Inrush current

less than 60A at 230VAC

cold start, 20ºC

Meet green mode

< 0.5W (at no load)

Efficiency

75%~85% depends on models

Holdup time

16ms typical

at rated load and 115VAC

Over voltage protection

latch off

Short circuit protection

auto recovery

Over current protection

auto recovery

Operating temperature

-20ºC to 60ºC

above 40ºC, derate at 2.5% per degree

Cooling

free air convection

Storage temperature

-20ºC to +85ºC

EMI

FCC class "B"

CISPR22 level "B"

EMS

EN61000-4-2,-3,-4,-5,-6,-11

Safety

UL 60950-1, LPS

CSA C22.2 No. 60950-1

TUV EN60950-1

Mechanical Specification:

 

AttachmentSize
SNP-POESeries.pdf872.6 KB